ps3 ylod fix part4 gilksy

use at your own risk! see part 5 here www.youtube.com
Video Rating: 4 / 5

Comments

  1. SuperFashionWorld says:

    All these questions about hairdryers. And just a few about the thermal compound, but no answers to them… Is the thermal compound supposed to dry up before reassembling the? unit or not:)?

  2. lainesnyder says:

    WOOOOOOOOOOOOOOOOO! THANK YOU SOOOOO MUCH? MAN THIS WORKED!!!

  3. gueturbo says:

    UPDATE: Did the reflow on my 60g ps3 with this method and it only lasted me a month and got the light again. this time seems like the rlod. im trying another method i found using flux to? clean and rebond the solder by the 2 chips and see how long that lasts.

  4. sambiles says:

    Man thanks so much… I didn’t do the heat gun thing, but I replaced the thermal compound just as you did and my ps3? is working again…

  5. zextable says:

    @snesguru celsius.?

  6. snesguru says:

    Is that 350 degrees Fahrenheit, Celsius, or centigrade? ?

  7. virean says:

    @iiTzzCR33D? no thats not hot enough

  8. virean says:

    @paradoiemaina hahahhaahhaaa?

  9. XxTeamDynamicxX says:

    @gueturbo
    I have the same problem im going to do this today.
    and i am also gonna buy arctic silver 5 but please if it happens again.
    could you post it on this video or pm me through youtube THX.
    im just? curious if this will work for a month, 3 months or forever if we are lucky.
    hope u will do it thx again.

  10. iiTzzCR33D says:

    can i do it w/ a hair? dryer

  11. gueturbo says:

    Thanks man you are awesome! Followed this tutorial and got my ps3 after 4 years working again! I am using artic silver 5 and hope it prevents this from happening again.? Thanks again.

  12. 0wnuquik says:

    @FunkifiedMakk? kk

  13. FunkifiedMakk says:

    @0wnuquik Isopropyl alcohol;? Arctic Silver 5 Thermal Compound

  14. Twinturbo120 says:

    @headshotmatty1 It’s not? a cheap alternative. Every single heatsink and fan in the world has thermal compound for better heat dissipation.

  15. Twinturbo120 says:

    0:16 I have two of those that broke. Any idea where I can buy them? And what they are called?
    ?

  16. kdougkid says:

    Can? I use a blow dryer instead of a heat gun?

  17. 0wnuquik says:

    What are the supplies needed for all this?
    1. Heat gun
    2.? The liquid used for wiping?
    3.? The stuff applied? on the squares?

  18. ngnong says:

    Its work man.? Thank you!!!

  19. pkfreak93 says:

    Hey dude, I love you!!!
    I just turned it? on without the fucking yellow light. Lets see for how long it will help.
    Thanks

  20. w33lerd33ler says:

    @poprulz777 Isopropynol… alcohol wipes or even nail varnish remover does? the job aswell, i have my own repair shop personally i use alcohol wipes to remove the old thermal compound.

  21. poprulz777 says:

    what was the alcohol used to clean off the? compound called?

  22. e6intheusmc says:

    You are Epic.? Thank you so much.

  23. 989beep says:

    Hey thanks it? worked….. for like 30 secs!! -.- you have any idea what it could have been ?

  24. JulianHent says:

    you? are my hero <3 <3

  25. erefxul says:

    Great videos! It’s really usefull for newbes like me. Wind up the PS3 is a hell for me and all these details you give? are priceless.
    Thank you! :)

Speak Your Mind

*

To submit your comment, click the image below where it asks you to...
Clickcha - The One-Click Captcha